English | Manual power save function |
| |
The power save function can be activated manually. If you decide not to use the watch | |||
| |||
| for a long time, use this function to further conserve energy. |
*While the second hand is moving at
CROWN Pull out to the first click.
➠ | * Pull out and push in within one second. |
▼ |
➠ | Push in to the normal position. |
| |
| * The hands will stop as the power save function |
| is activated. |
Note: If your watch has a screw lock type crown, turn the crown counterclockwise to unscrew it, and then, pull it out. After using the crown, push it back in to the normal position, and then, turn it clockwise to screw it in completely.
Caution:
Do not pull out the crown to the second click while the power save function is in operation. Otherwise, it is turned off, and the time data retained inside the watch will be erased, thus disabling the time relay function.
6
TIME RELAY FUNCTION
● | the watch, the time relay function is activated, and the hands are adjusted automatically to | English |
While the power save function is working, the |
| |
| though the hands have stopped. As a certain amount of electricity is generated by swinging |
|
| the time retained inside the watch. |
|
● If the watch is charged fully as the power save function is activated, the time relay function remains operable for approximately four years.
* The time period varies depending on the amount of power reserve stored in the KINETIC E.S.U.
How to activate the time relay function
Caution:
Do not pull out the crown to the second click before activating the time relay function. Otherwise, the time data retained inside the watch will be erased, thus disabling the time relay function.
●Swing the watch from side to side for 2 to 3 seconds.
7