Seiko 5R64, 5R65 manual Troubleshooting, Watch stops operating

English

TROUBLESHOOTING

Trouble
	Possible causes
The watch stops operating.	The power supplied by the mainspring has been
	consumed.
Even though you wear the watch every day,	The watch is worn on your wrist only for a short period
the power reserve indicator does not move up.	of time, or the amount of arm movement is small.
The watch temporarily gains or loses	The watch has been left or worn in extremely high or
	low temperatures.
time
	The watch has been left close to an object with a strong
	magnetic field.
	You drop the watch, hit it against a hard surface, or wear
	it while playing active sports. The watch is exposed to
	strong vibrations.
The inner surface of the glass is clouded.	Moisture has entered the watch because the gasket has
	deteriorated.
The watch stops even though the power	The watch has been left under a temperature below 0ºC.
reserve indicator is not showing “0”.
Right after starting the watch, it seems that the	When starting the watch, it takes a little time before the
second hand moves quicker than usual when	adjustment function starts working (this is not a
setting the time.	malfunction).

Solutions

Refer to “HOW TO USE” to wind the mainspring and reset the time. While you are wearing the watch or when you take it off, check the remaining power shown by the power reserve indicator and wind the mainspring if necessary.

Wear the watch for an extended period of time, or when taking off the watch, turn the crown to wind the mainspring if the remaining power shown by the power reserve indicator is not sufficient for the next use.

Return the watch to a normal temperature so that it works accurately as usual, and then reset the time. The watch has been adjusted so that it works accurately when it is worn on your wrist under a normal temperature range between 5 and 35.

Correct this condition by moving and keeping the watch away from the magnetic source. If this action does not correct the condition, contact the retailer from whom the watch was purchased.

Reset the time. If the watch does not work accurately as usual after resetting the time, contact the retailer from whom the watch was purchased.

Contact the retailer from whom the watch was purchased.

If the watch is left under a temperature below 0, it may stop if the power reserve indicator is showing less than one-sixth. In such a case, turn the crown to wind the mainspring.

It takes several seconds before the adjustment function starts working. Set the time after the second hand moves for approximately 30 seconds to set the time correctly.

English

22 * Contact the retailer from whom the watch was purchased for any other troubles. 23