*Before using the water resistance 5, 10, or 15 bar watch in water, be sure the crown is pushed in completely.
Do not operate the crown when the watch is wet or in water.
If used in sea water, rinse the watch in fresh water and dry it completely.
*When taking a shower with the water resistance 5 bar watch, or taking a bath with the water resistance 10 or 15 bar watch, be sure to observe the following:
•Do not operate the crown when the watch is wet with soapy water or shampoo.
•If the watch is left in warm water, a slight time loss or gain may be caused. This condition, however, will be corrected when the watch returns to normal temperature.
NOTE:
Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water.
■TEMPERATURES
Your watch works with stable accuracy between a temperature range of 5°C and 35°C (41°F and 95°F).
Do not leave your watch in very low temperatures below
However, the above conditions will be corrected when the watch re- turns to normal temperature.
■SHOCKS & VIBRATION
Light activities will not affect your watch, but be careful not to drop your watch or hit it against hard surfaces, as this may cause damage.
■MAGNETISM
Your watch will be adversely affected by strong magnetism. Keep it away from close contact with magnetic objects.
■CHEMICALS
Be careful not to expose the watch to solvents (e.g., alcohol and gasoline), mercury (i.e., from a broken thermometer), cosmetic spray, detergents, adhesives or paints. Otherwise, the case, bracelet, etc. may become discolored, deteriorated or damaged.
■CARE OF CASE AND BRACELET
To prevent possible rusting of the case and bracelet caused by dust, moisture and perspiration, wipe them periodically with a soft dry cloth.
