English

1.When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it will automatically reset the STOPWATCH hands to “0”.

2.It is recommended that the hands be set to the time a few minutes ahead of the current time, taking into consideration the time required to adjust the STOPWATCH hand position if necessary.

3.When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is so designed that the date changes once in 24 hours.

4.When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute.

2. STOPWATCH HAND POSITION ADJUSTMENT

STOPWATCH

1/5-second handSTOPWATCH minute hand

A

6

B

6

If the STOPWATCH hands are not in the “0” position, follow the procedure below to set them to the “0” position.

APress for 2 seconds.

*STOPWATCH minute hand turns a full circle.

BPress repeatedly to set STOPWATCH minute hand to the “0” position.

*The hand moves quickly if button B is kept pressed.

Page 6
Image 6
Seiko CAL. 7T94 manual Stopwatch Hand Position Adjustment