zSet the paper straight into the paper insert position until 5 cm or more of the paper edge is projected from the upper surface of the mechanism. (See Figure 8-2.) Close the platen after making sure that the paper is set straight. (Close state)

Figure 8-2 Loading Paper (2)

zWhen the platen is closed, the gear A and the gear B come together (See Figure 8-3) and the platen may stop. In this case, pull up the platen by the release lever, and then close the platen again.

Figure 8-3 Loading Paper (3)

zWhen the paper slants after being inserted, either feed paper until it straightens out or reset the paper.

8-2