Seiko Instruments S11 quick start Setup Tips, SmartPad by Seiko Instruments

2.In the Open box, type d:\setup (replace d with the drive letter of your CD drive) and then click OK.

Alternatively, double-click My Computer, double-click the icon for your CD drive, and then double-click Setup.exe.

Setup Tips

•During setup you might be asked for the hardware serial number. The

•

•

•

serial number is located under the paper writing pad, in the lower-left hand corner.

The first part of the serial number might already be displayed in the form. Be sure you don’t repeat the first few characters. The hardware serial number begins with the characters SP00.

On Windows NT, 2000, or XP, you must have administrative rights to install the software.

If you get an error during setup, disable your anti-virus program and run setup again.

SmartPad by Seiko Instruments 3