Ver x.x - This tells you the software version installed in the color changer set to the channel you are looking at.
[ 
/Enter ]
Identify - Pressing [ 
- ] will cause the color changer, whose status you are viewing, to initialize.
For the Goboram II:
GoboRAM - Indicates there is a gobo changer addressed to this channel.
[ 
/Enter ]
DCV 24.0 - This displays the DC voltage at the gobo changer.
[ 
/Enter ]
Pos 000 - This displays the position of the gobo section channel. If the gobo changer is moving the carriers toward FL, an arrow pointing to the right (>) will be displayed. If the gobo changer is moving the carriers toward 00, an arrow pointing to the left (<) will be displayed.
[ 
/Enter ]
Rot 000 - This displays the rotational position of the gobo. If the gobo changer is rotating the carriers toward FL, an arrow pointing to the right (>) will be displayed. If the gobo changer is rotating the carriers toward 00, an arrow pointing to the left (<) will be displayed.
[ 
/Enter ]
Spin OFF - When the third control channel for this gobo changer has a level of 99 or less, this display will tell you the continuous rotation option is off. When the third control channel has a level of FL, the display will tell you the gobo is spinning counter clock wise if the second control channel has a level of 00 - 49%. The display will tell you the gobo is spinning clock wise if the second control channel has a level of 51% - FL. When the third control channel has a level of FL and the second control channel has a level of 50%, the display will tell you the gobo is not spinning by showing HLD.
[ 
/Enter ]
Ver x.x - This tells you the software version installed in the gobo changer set to the channel you are looking at.
[ 
/Enter ]
11
