Power supply rack mounting
The Coloram II Power Supply rack mount accessory can be used with up to two Coloram II Power Supplies and allows them to be mounted into a
Follow these steps to install the power supply into the rack mounting tray.
1.Disconnect AC power from the power supply.
2.Place the rack mount tray right side up on a flat surface.
3.Position the power supply in the rack mount tray as shown below.
4.Attach the power supply to the rack mount tray using the supplied screws.
Note: The cover plate may be removed to allow installation of a second Coloram II Power Supply.
Figure 11
20
