Senco DS200-14v specifications Tool Specifications, Applications, Features and Benefits

DuraSpin™ Cordless Screw Driver

Model DS200-14v

NEW!

DuraSpin, the collated screw fastening system from SENCO ®, is designed to maximize efficiency in a wide variety of screw- fastening applications. Engineered for comfort and convenience, the DS200-14v cordless screw driver drives 1" to 2" screws.

Tool Specifications:

Voltage: 14.4 volts

Battery Ampacity: 1700 mAh

RPM: 2300 rev/min

Weight: 4.9 lbs. (2.2 kg)

Height: 10 inches (254 mm)

Length: 13.8 inches (350 mm)

Width: 2.8 inches (70 mm)

Recharge Time: 1 hour

Screw Drives/Charge: see chart on reverse side

Fastener Capacity: 50 screws (one strip)

Torque Delivered: 37 in-lbs

Generated Noise: 74 dBA

Vibration: less than 2.5m/sec2

Applications:

For drywallers and remodelers, DuraSpin is the ideal tool for drywall (to wood or steel studs), floor sheathing, and underlayment.

Features and Benefits:

•14.4 volt battery provides the optimum balance of power, weight and run-time across the full range of screws

•2,300 RPM high-torque motor drives screws without bogging down

•Patented clutch design means long-lasting durability

•One-hour charger and extra battery ensures a backup battery with a full charge

•Easy depth-of-drive adjustment regulates the precise amount of countersink

•Easy bit change — from phillips to square

•Wide range of collated screws to speed production

•Belt hook — DuraSpin goes where you go

•One full year warranty

Fastener Specifications:

Screw Lengths: 1" (25 mm) to 2" (50 mm)

Screw Diameters: #6, #7, #8

Application:	Drywall	Drywall to	Drywall to		Wood
	to Wood	Light Gauge Steel	Heavy Gauge Steel		to Wood
Drive/Head:	#2 Phillips	#2 Phillips	#2 Phillips		#2 Square
	Bugle	Bugle	Bugle		Flat
Thread:	Coarse	Fine		Fine	Coarse 2/3
					with Wax
Point:	Sharp	Sharp		Drill	Sharp
Finish:	Grey	Grey	Clear		Yellow
	Phosphate	Phosphate	Zinc		Zinc
Screw:

#6 X 11/4"	#6 X 11/4"	#6 X 11/4"
#6 X 15/8"		#8 X 11/2"
		#8 X 13/4"
#7 X 2"