![](/images/new-backgrounds/1302371/30237119x1.webp)
PREPARATION
INITIAL SET-UP:
1.Read safety warnings before
2.Ensure the oil level in the air compressor pump is adequate. The oil level should be at the center of the oil sight glass. If low, add Senco® part number PC0344 compressor pump oil.
LOCATION:
CAUTION
In order to avoid damaging the air compressor, do not incline the air compressor transversely or longitudinally more than 10°.
1.Place air compressor at least 12 inches away from obstacles that may prevent proper ventilation. Do not place air compressor in an area:
WARNING
Serious injury or death may occur if electrical sparks from motor and pressure switch come in contact with flammable vapors, combustible dust, gases or other combustible materials. When using the air compressor for spray painting, place the air compressor as far away from the work area as possible, using extra air hoses instead of extension cords.
ELECTRICAL:
DANGER
Improper connection of the
WARNING
This product must be grounded. If there should be a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an
1.Senco® DOES NOT RECOMMEND THE USE OF EXTENSION CORDS as this can create power loss and overheating of the motor. Use of an additional air hose is recommended rather than an extension cord. If use of an extension cord is unavoidable, it should be plugged into a GFCI found in circuit boxes or protected receptacles. When using an extension cord, observe the following:
Cable Length | Wire Gauge |
Up to 25 feet | 12 AWG |
Up to 100 feet | 10 AWG |
Up to 150 feet | 8 AWG |
Up to 250 feet | 6 AWG |
Use only
10 | Senco® Electric Air Compressor Manual 2004 |