Fastening Solutions™
Powerful and Fast
Weighs just 5.2 lbs.
Adjustable
PW 150R
16 Ga. Wide-Crown Roofing Stapler
360º
Adjustable Exhaust
Comfort Grip Resilient grip reduces vibration fatigue
Adjustable Shingle Guide
- For consistent shingle placement
Steel Wear Plates Reduces shingle abrasion on tool
For additional information on how SENCO Power Fastening Systems will save you time, reduce costs, and increase quality, call our
SENCO's Trigger Systems
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates by following a sequence - depress the safety element on the nose of tool against the work surface then pull the trigger. After each fastener is driven, release the trigger and lift the tool off the work surface before starting the sequence again. This trigger is recommended for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire) operates by keeping the trigger pulled while moving the tool along the work surface with a bouncing motion, depressing the safety element on the nose of the tool against the work surface where the fastener is to be driven. The trigger can be pulled either before or after depressing the safety element. This trigger is recommended for use by trained professionals only in high production or volume applications.
Both trigger systems are available, FREE OF CHARGE, for most SENCO tools. Choose the right trigger system for your specific needs!
Always read the Operators Manual and Safety Instructions with all tools to ensure proper use and safety precautions. Also, log on to www.senco.com or call
©2005 by Senco Products, Inc. | www.senco.com |
