Putting the VMX 200 into operation
Connecting the VMX 200 to a Bluetooth device
CAUTION
Danger of malfunction!
The transmitted radio waves of mobile phones can impair the operation of sensitive and unprotected devices.
Only make calls with the headset in locations and aircraft where wireless Bluetooth transmission is permitted.
The headset complies with the Bluetooth 3.0 standard. In order that data can be transmitted wirelessly using Bluetooth technology, you have to pair your headset with Bluetooth devices that support the “hands free profile” (HFP) or “headset profile” (HSP).
The headset can save the connection profiles of up to eight Bluetooth devices with which it has been paired. After
If you pair the headset with a ninth Bluetooth device, the saved connection profile of the first Bluetooth device will be overwritten. If you want to reestablish a connection with the first Bluetooth device, you have to pair the headset again.
Pairing the VMX 200 with a Bluetooth device
The following chapter describes, by way of example of a mobile phone, how to pair the VMX 200 with a Bluetooth device.
1Make sure that
–the headset’s battery is fully charged (see page 9),
–the mobile phone’s Bluetooth visibility is enabled (see the instruc- tion manual of the corresponding Bluetooth device),
–the headset is placed close to the mobile phone (approx. 20 cm or 7”).
2Switch the headset off (see page 14).
3Press and hold the
You hear an ascending beep in the headset and the LED flashes alter- nately blue and red, indicating that the headset is in pairing mode.
4Once the VMX 200 has found the mobile phone, the devices exchange device identification information. Select “Sennheiser VMX 200” on your mobile phone. If necessary, enter the default PIN code “0000”.
5The devices have identified each other and the headset is paired with the mobile phone. “Sennheiser VMX 200” appears on the display of the mobile phone, the LED flashes slowly blue.
1 | 2 Off | 3 Pairing |
| 3s | 5s |
20 cm
5 | 4 |
VMX 200
OK
Keyword 0000
10 VMX 200