Sennheiser 400 manual On/off Setting Switched on

￿Switch the microphone on by setting the “on/off” switch ￿ to one of the two positions:

“on/off”	Setting
	switched on
	(linear frequency response)

on off

switched on

(low-cut filter is activated for minimizing wind noise)

on off

On switch-on, the “batt” LED ￿flashes briefly, indicating that the battery is operational.

Note: When you have finished using the microphone, it is vital that you switch it off by setting the “on/off” switch ￿ to the “off” position!

on

off

￿Adjust the microphone senstivity to the volume of the sound source and to the input sensitivity of the camera/camcorder by setting the “vol” switch ￿ to the correct position:

“vol”				Setting
				Normal sensitvity:
				for normal or very loud sound sources and cameras/
–		vol	+
				camcorders with high input sensitivity
				High sensitvity:
				for extremely quiet or very distant sound sources and
	–	vol	+
				cameras/camcorders with low input sensitivity

3