If a problem occurs ...
If a problem occurs ...
The transmitter does not switch on
Possible cause | Solution |
Is the mains unit | Check the connection of the mains |
connected correctly? | unit to the transmitter and to the |
| mains (see page 10). |
|
|
Is the sound source | Switch your sound source on. |
switched on? |
|
|
|
Is the volume of | Set the volume on your sound |
the sound source | source to a medium value. |
sufficient? |
|
|
|
Is the transmitter | Take the receiver out of the |
set to operating | charging compartment. |
mode 2 (see | The transmitter automatically |
page 25)? | switches on. |
|
|
You cannot hear anything | |
|
|
Possible cause | Solution |
Is there a free line | Remove obstacles in the light path |
of sight between | between receiver and transmitter. |
receiver and |
|
transmitter? |
|
|
|
Is the receiver still | Move the receiver closer |
within the trans- | to the transmitter. |
mitter’s range? |
|
|
|
Are transmitter and | Avoid exposure to direct sunlight. |
receiver exposed to |
|
direct sunlight? |
|
|
|
Are all connectors | Check the connection between |
connected correctly? | the transmitter and your sound |
| source (see page 7). |
|
|
Is the operation | Check if the transmitter is |
indicator 8 lit? | switched on (see page 11). |
|
|
Is the transmitter | Set up the transmitter so that |
set up the wrong | the cables are guided away from |
way round? | the receiver (see page 6). |
|
|
21