Safety instructions

Safety instructions

Please read this instruction manual carefully and completely before using the devices.

Make this instruction manual easily accessible to all users at all times. Always include this instruction manual when passing the devices on to third parties.

Do not use the devices in situations which require special attention (e.g. when performing skilled jobs).

Always keep the devices dry and do not expose them to extreme temperatures.

Use the devices with care and set them up in a clean, dust-free envi- ronment.

Varnish or furniture polish may degrade the feet of the transmitter, which could stain your furniture. You should therefore place the transmitter on a non-slip pad to avoid potential staining of furni- ture.

This receiver allows you to set higher volumes than conventional headphones. This can cause hearing damage in persons with healthy hearing and especially in children.

Refer all servicing to qualified service personnel. Servicing is required if the devices have been damaged in any way, such as mains cable or plug damage, liquid has been spilled, objects have fallen inside, the devices have been exposed to rain or moisture, do not operate properly or have been dropped.

WARNING: To reduce the risk of fire or electric shock, do not expose the device and the mains unit to rain or moisture.

Use only the supplied mains unit.

Disconnect the mains connector from the wall socket

to completely disconnect the device from the mains,

during lightning storms or when unused for long periods of time.

Ensure that the mains unit is:

always readily operable and easily accessible,

properly plugged into the wall socket,

not covered or exposed to direct sunlight for longer periods of time in order to prevent heat accumulation,

only operated within the permissible temperature range (see “Specifications” on page 27),

not operated near heat sources.

2