5
Operating Mode 쐃:
yPermanently switched on:
disables the switch completely, the microphone is
permanently switched on.
yPush-to-talk (PTT):
The microphone is switched on as long as the membrane
switch is pressed.
yPush-to-mute (PTM):
The microphone is switched off as long as the membrane
switch is pressed.
yOn/off (factory preset):
turns the switch into push to switch on, push again to switch
off.
Frequency response curve 쐇:
yLow cut:
reduces the bass frequencies to minimize structure-born
noise – this switch (1) is independent of the other three DIP
switches and can be used in any of the following conditions
(eg: you can use the low cut as well as the bass boost if
placing the microphone on a small table with a high risk of
structure-born noise).
yLow boost:
extends the bass response to compensate for putting the
microphone on a small table.
yLow and high boost (factory preset):
extends the frequency response at both ends.
yLinear:
is the natural response of the microphone.
e 912 S_516585_0207_Sp6.book Seite 5 Freitag, 28. September 2007 11:09 11