Putting the AC 3200 into operation

To mount the AC 3200 into a 19" rack:

￿Slide the AC 3200 into the 19" rack.

￿Secure the rack mount “ears” ￿ to the rack using four screws (not included).

Connecting the antenna

CAUTION! Danger of damage to the devices!

Do not daisy-chain several AC 3200. Do not connect other active combiners to the AC 3200.

￿Never connect the AC 3200 to other active combiners.

￿Only connect suitable antennas to the output of the AC 3200!

The AC 3200 active transmitter combiner can be used with either the A 2003 UHF directional antenna, the A 1031 U omnidirectional antenna or the A 5000 CP circularly polarized UHF antenna. The antenna transmits the signals of all connected transmitters (see page 12).

The signals are combined onto the antenna output with no distribution attenuation.

To connect an antenna:

￿ Connect the antenna using a low-attenuation 50 Ω coaxial cable.

￿ Connect the coaxial cable to the antenna output ￿.

￿

Connecting a transmitter to the AC 3200

To connect a transmitter:

￿Connect the BNC cable of the transmitter to one of the eight RF inputs RF IN 1 to RF IN 8 ￿.

10