Sennheiser AC 3200 If a problem occurs

If a problem occurs ...

If a problem occurs ...

Problem		Possible cause	Possible solution
The LED	￿ does	The AC 3200 doesn’t consume	Check if the AC 3200 is
not light up		current	connected to the mains and
			if the on/off switch	￿ is
			pressed
Extra LEDs ￿light up		The transmitting antenna	Check that the transmitting
for RF inputs which		is not connected, the	antenna is correctly connected,
are not in use		transmitting antenna is	is not damaged, and that the
		faulty or the wrong type,	connecting cable is undamaged
		the cable to the transmitting	and is of the correct type.
		antenna is damaged, faulty,	Check that the transmitting
		or of the wrong type
			antenna is connected to the
			antenna output ￿ and that
			all transmitters are connected
			to RF inputs ￿
One or several		A transmitter is connected to	Switch the transmitter on
LEDs ￿ do not light		the respective input but is
up		switched off
Disturbed reception		The transmitting antenna is	Reduce the distance between
or no reception		not within the reception area	transmitter and receiver
		The receiver batteries are not	Replace the receiver batteries
		inserted or batteries are low
		The antenna is not connected	Check if the antenna is
		correctly	connected correctly
		Too high cable attenuation due	Use a shorter antenna cable or
		to too long antenna cables or	the correct type of antenna
		wrong type of antenna cable	cable
			Use low-attenuation 50 Ω
			coaxial cable
		Interference or	Set all transmitters of your
		intermodulation during	multi-channel system to
		multi-channel operation	intermodulation-free
			frequencies

If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser agent for assistance.

13