Sennheiser EK 3041-U manual Preparation, Mounting the receiver into the camcorder

Models: EK 3041-U

1 25

Page 10

10Mounting the EK 3041-U into the Sony SX camcorder

Preparation:

Mount the base plate

suitable for the Sony camcorder and fix it to the left and right of the receiver by means

of two screws.

The Sony adaptor features

a 15-pin connector (accessories).

SONY

Mounting the receiver into the camcorder:

•Screw the mounting frame to the Sony camcorder housing.

•Insert the receiver in the slot-in facility until the 15-pin connector securely connects.

•Fix the receiver (from above) to the mounting frame by means of four small

screws.

Image 10

Contents

EK 3041-U Instructions for useDiversity Receiver Thank you for choosing Sennheiser Chapter1 Brief description 2 Special features3 Modes of application 4 Noise reduction with HiDyn plus receiver 5 Diversity receptionelectronic switching from one signal to another receiverSET button for menu selection and programming 6 Connections and operating elementsON / OFF switch Multi-functiondisplay panel Antenna socket, diversity branch A7 Mounting the antennæ Preparation Mounting the receiver into the camcorderPreparation Mounting the receiver into the camcorderPreparation Mounting the receiver into the camcorder11 Power supply 13 Switching the receiver offPress the SET button once 15 Overview of menusPress the SET button twice Press the SET button four times CancellationPress the SET button three times Press the SET button five times17 Adjusting the headphone volume Notes18 Adjusting the squelch Notes19 Changing the receiving frequency Notes20 Assigning a channel number Notes21 Limiter NotesLocking the buttons Unlocking the buttonsPage Pocket transmitters 24 Suitable Sennheiser transmittersHand-heldtransmitters 26 Error messages 25 Safety instructions27 Error checklist 28 Recommended accessories via GA 3041-B: Power supply 29 Technical datavia GA 3041-C: AF output Änderungen vorbehalten Subject to alterations