Sennheiser EK 3041-U manual Power supply, Switching the receiver off

11 Power supply

Your EK 3041-U receiver can be powered from different power sources. The adaption to these power sources is via the plug-in connector at the bottom of the receiver and the corresponding accessories.

The EK 3041-U can be powered

•directly via the camcorder with 12 V or 5.6 V or

•via the GA 3041-B power adaptor which is attached to the special housing

12 Putting the receiver into operation / Switching the receiver on

If the receiver is inserted in the slot-in facility of a camcorder, the receiver is switched on as soon as the camcorder is put into operation. The receiver’s ON/OFF switch ￿ is then locked. If the ON/OFF switch is pressed, „Loc“ appears on the display.

If the receiver is mounted into a special housing for external attachment to camcorders, press the ON/OFF switch ￿ to switch the receiver on. After approx. two seconds, the display indicates the receiving frequency or its respective channel number.

Two bargraphes indicate the received RF signal (upper bargraph: „RF“) and the deviation (lower bargraph).

13 Switching the receiver off

To switch the receiver off, press the ON/OFF switch ￿ for approx. one second until „OFF“ briefly appears on the display.

Please wait at least two seconds before switching the receiver on again.

37