Recommended ground method

For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a power supply cord having a grounded 3 prong plug. To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer's responsibility to have a properly grounded 3 prong outlet installed by a qualified electrical installer.

It is the customer's responsibility:

■To contact a qualified electrical installer.

■To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 - latest edition, and all local codes and ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

Power Supply Cord

NOTE: Your unit’s device may differ from the one shown.

 

B

 

A

TEST

RESET

A. Reset button

B. Test button

This room air conditioner is equipped with a power supply cord required by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is crushed, the electronics detect leakage current and power will be disconnected in a fraction of a second.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

To test your power supply cord:

1.Plug power supply cord into a grounded 3 prong outlet.

2.Press RESET (on some devices, a green light will turn on).

3.Press TEST (listen for click; Reset button will trip, and on some devices, a green light will turn off).

4.Press and release RESET (listen for click; Reset button will latch, and on some devices, a green light will turn on). The power supply cord is ready for operation.

NOTES:

■The Reset button must be pushed in for proper operation.

■The power supply cord must be replaced if it fails to trip when the test button is pressed or fails to reset.

■Do not use the power supply cord as an off/on switch. The power supply cord is designed as a protective device.

■A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and must not be repaired.

■The power supply cord contains no user serviceable parts. Opening the tamper-resistant case voids all warranty and performance claims.

INSTALLATION INSTRUCTIONS

Unpack the Air Conditioner

WARNING

Excessive Weight Hazard

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

Remove packaging materials

■Remove and properly dispose of packaging materials. Remove tape and glue residue from surfaces before turning on the air conditioner. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your air conditioner.

■Handle air conditioner with care.

Prepare Air Conditioner for Installation

1.Locate provided bags of screws.

2.Place the top channel on top of the air conditioner, lining up the holes in top channel with the holes on top of air conditioner.

3.Using 2 - #8 x ³⁄₈" pan-head screws, attach top channel to air conditioner.

5

Page 4 Page 6
Page 5
Image 5
Whirlpool ACM052PS0 manual Installation Instructions, Unpack the Air Conditioner, Prepare Air Conditioner for Installation
Page 4 Page 6

ACM052PS0 specifications

The Whirlpool ACM052PS0 is a standout model in the realm of home appliances, specifically designed to enhance kitchen efficiency and convenience. This compact countertop microwave offers a blend of advanced technology, user-friendly features, and sleek aesthetics, making it an ideal choice for modern households.

One of the primary features of the Whirlpool ACM052PS0 is its spacious capacity. Despite its compact design, this model provides ample interior space that allows users to cook or reheat larger food items with ease. Coupled with a high wattage output, the microwave ensures quick and efficient cooking, significantly reducing meal prep time.

The microwave incorporates the innovative Sensor Cooking technology, which takes the guesswork out of food preparation. By automatically adjusting cooking time and power levels based on the moisture released by the food, this feature ensures perfectly cooked meals every time. This technology enhances not only the ease of use but also the quality of the results, allowing users to enjoy better-tasting dishes.

Additionally, the Whirlpool ACM052PS0 features a user-friendly control panel with a clear digital display, making it incredibly easy to navigate through different options. The panel includes presets for a variety of cooking tasks, including popcorn, pizza, and beverages, streamlining the cooking process. The one-touch settings are particularly beneficial for users seeking quick solutions for common cooking needs.

Another notable characteristic is the sleek stainless-steel finish, which not only adds style but also provides durability. This aesthetic design ensures that the microwave fits seamlessly into any kitchen décor, from traditional to contemporary.

The unit is equipped with a turntable, ensuring even cooking by promoting consistent heat distribution throughout the food. Additionally, it features a child lock option, providing an extra layer of safety for families with young children.

In conclusion, the Whirlpool ACM052PS0 microwave integrates advanced cooking technology with user-centric design, making it a valuable addition to any kitchen. Its combination of spacious capacity, sensor cooking functionalities, and stylish appearance make it an appliance that stands out in terms of both form and function.
Top Page Image Contents