Sennheiser ew 300IEM G3 manual Antenna Distribution and Mounting Packages

Antenna Distribution and Mounting Packages

Sennheiser has put together several antennas distribution packages to address common wireless scenarios.

G3 OMNI KIT 4

Active splitter kit for four receiver system using omnidirectional remote paddle antennas, includes:

(1)ASA1/NT active splitter

(2)A1031-U antennas

(1) GA3 rack mount kit

G3 OMNI KIT 8

Active splitter kit for eight receiver system using omnidirectional remote paddle antennas, includes:

(2)ASA1/NT active splitters

(2)A1031-U antennas

(1)GA3 rack mount kit

(2)BB1 interconnect BNC cables

G3 DIR KIT 4

Active splitter kit for four receiver system using directional remote paddle antennas, includes:

(1)ASA1/NT active splitter

(2)A2003-UHF antennas

(1)GA3 rack mount kit

G3 DIR KIT 8

Active splitter kit for eight receiver system using directional remote paddle antennas, includes:

(2)ASA1/NT active splitters

(2)A2003-UHF antennas

(1)GA3 rack mount kit

(2)BB1 interconnect BNC cables

G3 IEM DIR KIT 4

Active combiner kit for four IEM transmitters with DC power distribution, includes:

(1)AC3/NT active combiner

(1)A2003-UHF antennas

(1)GA3 rack mount kit

G3 FRONT KIT 4

Active splitter kit for four receiver system using front-mount antennas, includes:

(1)ASA1/NT active splitter

(1)AM2 front mount kit

(1)GA3 rack mount kit

G3 FRONT KIT 8

Active splitter kit for eight receiver system using front-mount antennas, includes:

(2)ASA1/NT active splitters

(1)AM2 front mount kit

(1)GA3 rack mount kit

(2)BB1 BNC interconnect cables

NOTE: The antennas supplied with all ew rack-mountable receivers are to be used only in chassis-mounted (rear jacks), or in conjunction with the AM2 front-mounting kit. These are ground plane devices and are never to be used as a remote antenna solution on the end of a cable.

The following items are not included with Sennheiser’s antenna distribution kits. You may require any of the following:

•Low loss antenna cable to connect remote antennas to the antenna distribution

(cable length to suit the application)

•Mounting brackets for remote antennas

•Rack screws

•Additional GA3 rack-mount kits (not included with ew 100 G3 series systems)

16