Sennheiser HDI 830 Setting the receiver to the frequency of the transmission system, Adjusting the balance

Using the HDI 830

Setting the receiver to the frequency of the transmission system

You can set the receiver to the frequency of the transmission system yourself or have the frequency preset by your Sennheiser partner.

To set a frequency on the receiver:

￿Put the receiver on.

1	￿ Press the channel selection button 4
	until you have found the frequency of
4	your transmission system.
	On the receiver, the channel indicator 1
	can light up as follows:
Channel indicator lit Frequency		You hear the sound in
2.3+2.8 MHz		stereo
2.8 MHz		mono

Note:

The channel indicator 1goes off after 30 seconds.

To set a fixed frequency and to deactivate the channel selection button 4:

￿Contact your Sennheiser partner.

Adjusting the balance

3	The balance control allows	for right/left
	balance adjustment. Adjust	the balance so
	that you can hear equally well with both ears.
	￿ Turn the balance control 3 to the left L or
	right R to increase the volume for the corre-
	sponding ear.

6