Using the HDI 830

Replacing and charging the rechargeable battery

￿ Charge the rechargeable batteries in the charging compart- ment of the L 300 10-10 charger. For further information on the features and functions of the 3h charger, please refer to the instruction manual of the

L 300 10-10 charger.

￿Before using the rechargeable batteries for the first time, charge them for about three hours.

￿After use, place the receiver back into the charging compartment of the L 300 10-10 charger.

The receiver switches off automatically.

When the rechargeable battery is discharged, you can continue to use the receiver with an optional spare rechargeable battery:

￿Remove the discharged battery from the receiver and charge it in the L 300 10-10 charger.

To remove the discharged battery from the receiver:

￿ Pull the battery out of the receiver’s battery compartment 5.

5

 

To insert the receiver’s battery:

 

￿ Insert the battery into the receiver as

 

shown.

 

￿ Slide the battery into the battery compart-

5

ment 5as far as it will go.

Notes:

–With a fully charged rechargeable battery, the operating time is up to 12 hours.

–Always store the receiver in the L 300 10-10 charger to ensure that it is fully charged. The intelligent battery charging tech- nology prevents overcharging.

–Do not store the receiver on a glass dummy head, chair armrest, or similar for long periods of time as this can reduce the contact pressure of the earbows. Furthermore, with the earbows pulled apart, the receiver remains switched on.

7