Manuals / Brands / Home Audio / Headphones / Sennheiser / Home Audio / Headphones

Sennheiser HMD120, HME 105, HME 110, HME 120 Using the headsets, Mono/Stereo selection (HME 100, HME 110), Adjusting the volume

1 20

Download 20 pages, 981.48 Kb

Using the headsets

Mono/Stereo selection (HME 100, HME 110)

In general, you‘ll receive a mono sound source so that the Mono/Stereo switch can remain set to ‘Mono’. When using a stereo intercom system, set the headset to stereo operation. Remove the ear cushion (see „Replacing the ear cushions“ on page 15) from the earcup with the microphone boom attached and set the Mono/Stereo switch to ‘Stereo’.

Adjusting the volume

Exposure to loud sounds can cause hearing damage!

Set the volume control to a medium value. Make sure that you can hear critical sounds such as warning alarms.

Contents

Instructions for useHMD Page Contents Safety requirements Headset features yPersonalization of the headset Name: Product variants Page Delivery includes Preparing the headsets for use Connecting the headsets Adjusting the headband Positioning the microphone For positioning the microphone of the HMD 120 headset, proceed as follows: Tilt the microphone for final positioning Using the headsets Mono/Stereo selection (HME 100, HME 110) Adjusting the volume Adjusting the microphone gain (not HMD 120) Folding up the headphones Spare parts Replacing the wind screen Replacing the ear cushions To replace a damaged earpad, proceed as follows: Connector assignment In case of difficulty Technical data General Data Manufacturer declarations