Sennheiser HME 95 instruction manual Microphone incl. preamplifier, Connector assignment

Nominal impedance	225	Ω mono
	300	Ω stereo
Sound pressure level stereo	100 dB at 1 kHz, 1V
mono	97 dB at 1 kHz, 1 V
THD at 94 dB SPL	< 1 %
Attenuation	13–34 dB passive
	attenuation
Contact pressure	approx. 5 N

Microphone incl. preamplifier

Type	MKE 46
Transducer principle	pre-polarized condenser
	microphone, noise-compensating
Frequency response	350–6,000 Hz
Output voltage	40 mV/Pa (factory pre-set)
	= 400 mV at 114 dB SPL
	(adjustable from 17–100 mV/Pa)
Terminating impedance	150–2,200 Ω
Supply voltage	8–16 V DC

Connector assignment
¼” (6.35 mm) jack plug		5.25 mm jack plug
1	Audio Hi left	1 not assigned
2	Audio Hi right	2 Microphone Hi
3 Audio Lo		3 Microphone Lo

15