| Connecting a mobile telephone | ||
The 2.5 mm jack socket | allows you to connect a mobile | ||
| telephone. For this purpose, the NoiseGard active noise | ||
| compensation must be switched on and the microphone | ||
| connector | must be connected to the aircraft intercom. | |
| A suitable adapter for your mobile telephone with 2.5 mm | ||
| jack socket is available from your specialist dealer. | ||
DANGER! | Danger | of accident due to reduced | |
| |||
attention!
Making telephone calls or operating the mobile telephone limits your attention and may cause accidents.
During flight operation, do not use the headset for telephone calls!
For the latest list of compatible mobile telephones, please refer to the „Professional Audio“ > „Aviation Headsets“ section on our website at www.sennheiser.com.
Connect the audio cable to the 2.5 mm jack socket
socket on your mobile telephone
You can adjust the volume of the mobile telephone via
the headset’s operating control. However, the functions 
of the mobile telephone cannot be controlled via the headset’s operating control.
Switch NoiseGard on (see “Switching NoiseGard on/off” on page 15).
Audio from the mobile telephone and from the intercom are heard simultaneously through the headset.
Operate your mobile telephone as usual and observe the manufacturers instructions.
9