Sennheiser HMEC 250 Using the headset

Attaching the cable clip

The cable clip allows you to attach the headset cable to your clothing so that the cable doesn’t hinder or distract you.

Guide the headset cable through the cable clip as shown.

Attach the cable clip to your clothing.

	Adjusting the headset
	Wear the headset so that
	– the microphone boom is on the left side of the
	mouth (see right/left labeling on the headband joints)
	and
	– the headband runs over the top of your head.
	Adjust the length of the headband so that
	– your ears are completely inside the ear pads ,
	– you feel even, gentle pressure around your ears,
	– a snug fit of the headband on the head is ensured.
	In this way, optimum transmission quality, good noise
	attenuation and best possible comfort is ensured.

	To ensure sufficient noise attenuation, final adjustment is
	best made in a noisy environment.