Switching between mono and stereo mode
The mono/stereo switch allows you to switch between mono ( ) and stereo ( ) mode, depending on the audio system.
Set the mono/stereo switch to the desired posi- tion: mono ( ) or stereo ( ).
Changing the left and right stereo channel
The position “R” or “L” of the BOOM switch corresponds to the position of the microphone on the left or right side of the mouth. When the microphone boom is rotated to permit left or right side microphone orienta- tion, the BOOM switch allows you to correctly assign the audio channels (L/R) to the appropriate headphone sides. This enables the correct orientation of the volume controls and any stereo audio signals. To move the BOOM switch, use a pointed tool.
Powering NoiseGard™ via two (rechargeable) batteries
Insert two 1.5 V AA alkaline batteries (IEC LR 6) or two 1.2 V AA rechargeable batteries (IEC LR 6). Observe correct polarity when inserting the batteries.
11