Connecting a mobile telephone (cable -BV-K / -BV-KP only)

The 2.5 mm 3-pole jack socket allows you to connect a mobile telephone. For this purpose, the NoiseGard™ active noise compensation must be switched on and the microphone connector must be connected to the aircraft radio/audio. A suitable adapter for your mobile telephone with 2.5 mm jack socket is available from your Sennheiser agent.

CAUTION! Danger of accident due to reduced attention!

Making telephone calls or operating the mobile telephone limits your attention and may cause accidents.

During flight operation, do not use the headset for telephone calls!

￿Connect the audio cable to the 2.5 mm 3-pole jack

socket on the operating control I and to the corresponding jack socket on your mobile telephone.

You can adjust the volume of the mobile telephone via the headset’s operating control. However, the functions of the mobile telephone cannot be controlled via the headset’s operating control.

￿Operate your mobile telephone as usual and observe the manufacturer’s instructions.

The latest information on cell phone compatibility is available at www.sennheiser.com in the “Aviation Head- sets” category.

13