Putting the system into operation
Setting up the transmitter
Place the transmitter so that there are no obstacles in the light path between transmitter and receiver.
Note:
Avoid exposure to direct sunlight. Direct sunlight may inter- fere with the reception and may damage the transmitter.
If you use a plasma TV screen, please observe the following to ensure
yMake sure that the transmitter’s infrared light beam is pointed directly at the receiver and that the light path between transmitter and receiver is not obstructed.
yIf necessary, use a standard extension cable (3.5 mm stereo jack plug) to reduce the distance between transmitter and receiver. This extension cable is available from your Sennheiser dealer.
Connecting the transmitter to the sound source
Plug in one end of the connecting cable to the blue AUDIO socket on the transmitter.
Check the connection possibilities of your sound source (e.g. TV).
A |
| B | C | D |
TV |
| TV | AV | No socket |
| L | R |
|
|
Headphone | RCA sockets | SCART socket | External | |
socket |
|
|
| microphone |
5
