CConnecting the transmitter via the SCART socket
If your sound source has a SCART socket, you can order the suitable SCART adapter (see “Accessories” on page 15) from
your Sennheiser dealer.
Connect the connecting cable to the SCART adapter .
Plug in the SCART adapter to the SCART socket on your TV.
If your TV has several SCART sockets, select a SCART socket
that is also an output (for details, see operating manual of your TV).
DUsing an external microphone
If your sound source doesn’t have a headphone or audio output, SCART or RCA socket, you can use your system together with an external microphone (see “Accessories” on page 15).
Connect the microphone to the blue socket AUDIO on the transmitter.
Position the microphone in front of the loudspeaker of your sound source. You can change the sound by varying the position of the microphone in front of the loudspeaker.
Connecting the transmitter to the mains
Connect the mains unit to the yellow socket (12 VDC) on the transmitter.
Plug the mains connector into a wall socket.
The LED lights up green. If the receiver is stored in the transmitter’s charging compartment , the LED goes off.
Note:
Pull the mains connector out of the wall socket when the transmitter will not be used for extended periods of time (e.g. when you are on holiday). In this case, however, the rechargeable battery will not be recharged.
7