Sennheiser IS 150, IS 300 Level control of the transmitter, Putting the receiver into operation

Level control of the transmitter

Adjust the volume of your hi-fi system or television set to a middle position. The TI 150 / TI 300 transmitter features an automatic modulation control which prevents overmodulation.

Putting the receiver into operation

Insert the BA 151 accuplug into compartment in the receiver.

Take special note of the instructions on accuplug operation on pages 20/21 of this manual!

(NB: The BA 151 accuplug must be charged for 24 hours before first use!)

Switching on the receiver

Use control to switch on the receiver and adjust the volume. An efficient volume compression system avoids the necessity of frequent volume adjustments. It reproduces quiet sounds slightly louder and loud sounds slightly quieter.

Adjusting your hi-fi system

Read the instruction manual of your hi-fi system or television set to find out whether the volume control also works for the headphone socket, or whether this socket has a separate volume control. The manual will also tell you how to turn off the main loudspeakers.

17