Sennheiser IS 300, IS 150 manual Setting up the transmitter, Putting the transmitter into operation

Setting up the transmitter

Place the transmitter near your television set or hi-fi system.

Putting the transmitter into operation

￿ Use the supplied cable to connect socket on the TI 150 / TI 300 transmitter with the headphone socket on your television set or hi-fi system.

NOTE

If your television set does not have a headphone socket, the sound signal can also be taken from the SCART socket (video recorder socket). Please order the suitable Sennheiser adaptor (Cat. no. 47874) from your Sennheiser dealer.

Only for the TI 150 mono transmitter: For television sets without any suitable headphone sockets, the sound can also be taken directly from the loudspeaker by using the Sennheiser MKE 100 TV microphone (Cat. no. 03354). Connection to socket . (This is supplied instead of the headphone socket cable in the UK version).

￿ Connect the supplied plug-in mains unit to socket on the TI 150 / TI 300 transmitter, then plug the mains unit into the mains.

16