Cascading several charging units
Several charging units can be cascaded together with the metal rails mounted at the bottom of each charging unit. The charging units are then powered by a common mains unit:
•A single charging unit can be powered by the NT 92 mains unit
•Up to five charging units can be powered by the NT 2013 mains unit (N.B.:Do not use the NT 2013 for a single charging unit!)
Unscrew the screws and slide out the rails. With the rails half out, reinsert two screws and screw them tight. Slide on the second unit (with rails removed), reinsert the other two screws and tighten them. Repeat for further units (see diagram).
The illustration on the right shows three cascaded charging units. 30 stethoset receivers or the corresponding number of accupacks can be recharged and stored.
NT 2013
3 x L
9
