Getting started
Pairing the headphones with a Bluetooth device
Ensure that your headphones are within the 20 cm range of your smartphone during this procedure.
1.Switch the headphones on (see page 17). Press the power button and keep it pressed until you hear the voice prompt “pairing” and the LED flashes blue and red.
The headphones are in pairing mode.
2.Enable the Bluetooth visibility on your smartphone.
3.On your smartphone, start a search for Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone are displayed.
4.From the list of found Bluetooth devices, select “MOMENTUM M2 AEBT” to establish a Bluetooth connection to the headphones. If necessary, enter the default PIN code “0000”.
If pairing was successful, you hear the voice prompt “connected” and the LED switches off.
1 | › power on ‹ |
| › pairing ‹ |
| 1s |
L
| 20 cm | 4s |
| |
3 |
|
2
Menu
Bluetooth on
Bluetooth o
4
MOMENTUM M2 AEBT
Menu
Add device
MOMENTUM M2 AEBT
Keyword: 0000
› connected ‹
L
If no connection is established within 5 minutes, pairing mode is terminated and the headphones return the disconnected state. Switch the headphones off and repeat the pairing procedure.
M2 AEBT 15