The Sennheiser -Microphone -Set- perfeet sound

with aperfeet pieture

The set comprises the following componentes:

1 Handgrip/powering module K 30 AV including battery

1 Microphone module ME 80

1 Camera adapter MZQ 30

1 Wind shield MZW 415

1 Carrying case

(1) Handgrip/powering module K 30 AV

Together with a microphone module (e. g. ME 80) it forms a complete microphone. The K 30 AV represents the supply part which deliveres the voltage necessary for the microphone module. At the same time it serves

as a microphone handle. More information may be found in the enclosed User'sGuide K 30 AV.

(2) Microphone module ME 80

Microphone module with pronounced directional characteristic (super- chardioid/lobe). A complete directional microphone is formed simply by screwing together with the handgrip/powering module K 30 AV. Additional information is given in User'sGuide K 30 AV.

(3) Camera adapter MZQ 30

Forfixing handgrip/powering modules onto cameras wh ich are equipped with a flash mount. Also suitable for tripod mounting via the thread insert 3/8" to 1/., (see enclosed instruction manual).

(4) Wind shield MZW 415

Suitable for microphone module ME 80. Effectively suppresses wind and pop noises. Indispensible for outdoor recordings and close-miking.

(5) Recess tor connecting cables

This recess can accommodate microphone connecting cable MZK 30 AV, MZK 802 or MZK 802-1. Wiring details and a description of this cable are to be found on page 27 of the enclosed User'sGuide K 30 AV.

(6) Recess tor microphone module ME 20

Should you decide to expand the microphone module system, this recess can accommodate microphone module ME 20. This module has an omnidirectional characteristic, i. e. it receives sound from all directions equally. The ME 20 is designed for use primarily in recording

commentaries, discussions etc. Further information may be found in User'sGuide K 30 AV.

(7) Recess tor microphone module ME 40

This module features a pronounced directional characteristic (super- cardioid) and is suitable for use as a reporting or interview microphone in noisy surroundings (see User'sGuide K 30 AV).

(8) Recess tor clip-on microphone MKE 40-3

In cases where the microphone must be as unobstrusive as possible, the clip-on microphone MKE 40-3 is an advantage. Like all modules it is powered from the K 30 AV.lt is supplied with a 3 m long connecting cable, at the end of which is an special coupling for connecting to the handgrip/powering module. The microphone has cardioid directional pattern and is suitable as a "moderator" microphone for recordings in noise-filled surroundings.

(9) Recess tor wind shield MZW 201

This recess is intended for the pop and wind shield MZW 201. The

MZW 201 effects high wind-damping and is suitable for microphone module ME 40.