Putting the Set 840 S system into operation
AConnecting the transmitter to a headphone socket
Plug the other end of the
connection cable J into the |
| |
headphone socket on your | K | |
sound source. | ||
J | ||
|
Is the plug on the connection cable too small for the headphone socket?
Plug the adapter to ¼”
(6.3 mm) jack socket K onto the connection cable J.
Adjust the volume of the headphone socket on your sound source to a medium level.
This improves the quality of wireless sound transmis- sion. For detailed information, please refer to the instruction manual of your sound source (e.g. TV).
With most TVs, the headphone socket is located at the front or sides.
BConnecting the transmitter to an RCA socket
Plug the audio adapter for
RCA | socket L onto | the | L | |
connection cable J. |
| |||
Connect the red connector of | J | |||
the audio adapter L to the | ||||
| ||||
red | RCA socket R of | your |
| |
sound source. |
|
| ||
Connect the white connector of the audio adapter L to the white or black RCA socket L of your sound source.
With most TVs, the RCA socket is located at the rear.
If your TV has several RCA sockets, use the socket RCA output.
8