Putting the Set 840 S system into operation

Connecting the transmitter to the mains

The EU and UK country adapters are included with the EU version of the Set 840 S; the US country adapter is included with the US version of the Set 840 S.

￿ Slide the supplied

country

 

 

N

adapter O onto the

mains

 

 

 

 

 

unit N.

 

 

 

 

￿ Connect the yellow connector

EU

UK

US O

of the mains unit to the yellow

 

 

 

socket I of the transmitter.

￿Plug the mains unit N into a

wall socket.

The operation indicator B on the transmitter lights up green.

I

N

When connecting the transmitter to the mains for

the first time, charge the rechargeable battery for 3h 3 hours as described in the chapter “Storing and

charging the receiver” on page 20.

If there is no audio signal from the sound source for about 3 minutes, the transmitter automatically switches off. The operation indicator B goes off.

To disconnect the transmitter from the mains, pull out the mains connector from the wall socket.

When not using the transmitter for extended periods of time (e.g. when you are on holiday), pull out the mains connector from the wall socket. In this case, however, the receiver’s rechargeable battery will not be recharged.

11