Manuals / Sennheiser / Home Audio / Headphones

Sennheiser SH350 manual Connecting the headsets, HMEC 350 and HMEC 450 headsets, HMEC 352 headset

Models: SH350

1 36

Download 36 pages 59.8 Kb

Page 10

Connecting the headsets

Connecting the headsets

Connecting cables for headsets

HMEC 350 and HMEC 450 headsets:

1 ¼” (6.35 mm) stereo jack plug for connecting the headphones 1 PJ-068 jack plug for connecting the microphone

1 XLR-3 plug for connecting the power supply for the NoiseGard™ electronics

Connecting cable for

HMEC 350 and HMEC 450

HMEC 352 headset:

1 ¼” (6.35 mm) stereo jack plug for connecting the headphones

1 PJ-068 jack plug for connecting the microphone and the power supply for the NoiseGard™ electronics

Connecting cable for

HMEC 352

HMEC 355 headset:

1 XLR-5 plug for connecting the headphones, the microphone and the power supply for the NoiseGard™ electronics

Connecting cable for

HMEC 355

10

Image 10

Sennheiser SH350 manual Connecting the headsets, HMEC 350 and HMEC 450 headsets, HMEC 352 headset, HMEC 355 headset

Contents

HMDC HMEC 350/352/355 355-C/356/372/450Adjusting the volume ContentsAdjusting the headband Folding up the headphonesSafety tips Headset features HMEC 350 NoiseGard headsetHMEC 352 NoiseGard headset Product variantsHMEC 355 NoiseGard headset HMEC 372 NoiseGard headset HMEC 355-CNoiseGard headsetHMEC 356 NoiseGard headset No Mono/Stereo switchHMDC 372 NoiseGard headset HMEC 450 NoiseGard headsetStylish silver design Leatherette ear cushions HMEC 352, HMEC 355 and HMEC 356 headsets Delivery includesRecommended accessories Replaceable gel ear cushions Cat. NoHMEC 352 headset Connecting the headsetsHMEC 350 and HMEC 450 headsets HMEC 355 headsetHMEC 356 headset HMEC 372 and HMDC 372 headsetsHMEC 355-Cheadset Connecting cable for HMEC 355-CXLR-5connector Redel connector NoiseGardXLR-3connector NoiseGard ¼” 6.35 mm stereo jack plugDanger of short circuit Powering optionsHMEC 350 and HMEC 450 headsets 1. Connecting the headset to the on-boardsystemDanger of short circuit HMEC 355 headset HMEC 372 and HMDC 372 headsetsHMEC 352 headset HMEC 355-CheadsetInserting / replacing the the batteries LED operation and battery status indicationOpen the cover of the battery compartment Attaching the battery pack to clothing Connecting the headset Preparing the headsets for use Relocating the microphone boom Positioning the microphoneTilt the microphone for final positioning Using the headsets Attaching the cable clip Spare parts Replacing the headband padding Valuable information on NoiseGard NoiseGard active noise compensation is achieved by generating a signal identical in sound pressure level but exactly reversed in phase to the noise signal, the effect being that the out-of-phasesignal cancels most of the noise signal Problem In case of difficultyProblem Possible cause and what to doActive noise compensation but Microphone incl. preamplifier Technical dataHeadphones HMECHMEC General dataHMEC HMECTechnical data HMEC 355-CHMDC HeadphonesHMEC 355-C General dataHMEC HMECGuarantee Certificate Certificate of ConformityPage Publ. 04/05 512743 / A04