Using the bodypack transmitter
Using the bodypack transmitter
To establish a transmission link, proceed as follows:
1.Switch the receiver on (see the instruction manual of the receiver).
2.Switch the bodypack transmitter on (see next section). The transmission link is established and the display backlighting of the receiver changes from red to orange.
It is vital to observe the notes on frequency selection on page 27.
If you cannot establish a transmission link between body- pack transmitter and receiver, refer to the chapter “Synchronizing the bodypack transmitter with the receiver
– individual operation” on page 27.
Switching the bodypack transmitter on/off
Push the two battery compartment catches and open the battery compartment cover .
To switch the bodypack transmitter on (online operation):
ON/OFF Briefly press the ON/OFF button .
The bodypack transmitter transmits an RF signal.
The standard display “Frequency/Name” appears on the display panel. The red ON LED lights up and the transmission icon is displayed.
You can switch the bodypack transmitter on and deactivate the RF signal on
11