Using the bodypack transmitter
Exit the operating menu.
Slide the MUTE switch to the left, to the position MUTE.
The bodypack transmitter reacts as indicated in the table.
The current state of the muting function or the RF signal is displayed on the display panel of the bodypack transmitter.
An additional display of the muting function appears on the receiver’s display panel when
•the pilot tone function is activated on both bodypack transmitter and receiver
and, in addition,
•this display has been activated via the “Warnings” menu item on the receiver (see the instruction manual of the receiver).
531.375MHz
ew300 G3 
AF P MUTE
Audio signal is muted
Transmitter’s display panel: “MUTE” is displayed
Receiver’s display panel: | “TX Mute” is displayed* |
|
|
*only when activated on the receiver (see previous section)
Audio signal is activated (muting is deactivated)
Transmitter’s display panel: “MUTE” is not displayed
Receiver’s display panel: | “TX Mute” is not displayed |
|
|
RF signal is deactivated
Transmitter’s display panel: transmission icon is not displayed,
“MUTE” is displayed
Receiver’s display panel: | “RF Mute” is displayed* |
|
|
*only when activated on the receiver (see previous section)
RF signal is activated
Transmitter’s display panel: transmission icon is displayed,
“MUTE” is not displayed
Receiver’s display panel: | “RF Mute” is not displayed |
|
|
14