Putting the bodypack transmitter into operation
Putting the bodypack transmitter into operation
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack (see “Accessories and spare parts” on page 32).
Open the battery compartment by pushing the two catches in the direction of the arrows and open the cover .
Insert the two batteries or the accupack as shown above. Please observe correct polarity when inserting the batteries/accupack.
Close the battery compartment.
The battery compartment cover locks into place with an audible click.
Charging the accupack
To charge the bodypack transmitter with the BA 2015 accupack (see “Accessories and spare parts” on page 32) installed:
Insert the bodypack transmitter into the L 2015 charger (see “Accessories and spare parts” on page 32).
The L 2015 charger can only charge the combination BA 2015 accupack/bodypack transmitter. Standard batteries (primary cells) or individual rechargeable battery cells cannot be charged in this way.
Connecting the microphone cable/ instrument cable
The audio input is designed for the connection of both condenser microphones and instruments (e.g. guitars). DC powering of the condenser microphones is via the audio input (3.5 mm jack socket MIC/LINE ).
8