|
|
| Using the radio microphone | ||
|
|
| |||
| Setting | MIC button ... | Function |
| |
|
|
|
|
|
|
| “RF On/Off” | Press briefly |
| Deactivates the |
|
|
|
|
| RF signal |
|
|
|
|
| (offline operation) |
|
|
|
|
| Activates the RF signal |
|
|
|
|
| (online operation) |
|
| “Push To | Keep pressed |
| Mutes the audio signal |
|
| Mute” |
|
| temporarily |
|
|
|
|
| (cough function) |
|
|
|
|
|
|
|
| “Push To | Keep pressed |
| Unmutes the audio |
|
| Talk”* |
|
| signal temporarily |
|
|
|
|
| (speech function) |
|
| “Disabled” | No function |
|
|
|
|
|
|
|
|
|
*If you select “Push To Talk”, the radio microphone will be muted until you press the MIC button.
From the “Mute Mode” menu item, select the desired setting (see page 25).Exit the operating menu.Briefly press the MIC button or keep it pressed. The radio microphone reacts as indicated in the table.
The current state of the muting function or the RF signal is displayed on the display panel of the radio microphone (see next section).
An additional display of the muting function appears on the receiver’s display panel when
•the pilot tone function is activated on both radio microphone and receiverand, in addition,•this display has been activated via the “Warn- ings” menu item on the receiver (see the instruc- tion manual of the receiver).
|
| |
531.375MHz |
|
|
ew300 G3 |
| |
AF P MUTE |
|
|
|
| |
Audio signal is muted |
| |
| MIC button : |
| not backlit |
| Radio microphone’s display | “MUTE” is displayed | |
| panel: |
|
|
| Receiver’s display panel: | “TX Mute” is displayed* | |
15