Sennheiser SKM 300 manual 26

Adjusting settings via the operating menu

Setting the mode for the MIC button – “Mute Mode”

	Advanced Menu		Mute Mode			Mute Mode
	Mute Mode			AF On/Off			RF On/Off
	AF On/Off
Call up		Select the desired			Store the setting
“Mute Mode”		setting

“Stored”

SettingFunction

“AF On/Off” If you press the MIC button, the audio signal is muted.

“RF On/Off” If you press the MIC button, the radio signal is deactivated.

“Push To Mute” The audio signal is muted as long as you press the MIC button.

“Push To Talk”* The audio signal is activated as long as you press the MIC button.

“Disabled” The function is deactivated.

*If you select “Push To Talk”, the radio microphone will be muted until the MIC button is pressed.

For information on how to use the MIC button, refer to page 14.

Adjusting the transmission power – “RF Power”

	Advanced Menu			RF Power			RF Power
	RF Power				Standard			Low
		Standard
Call up			Select the desired			Store the setting
“RF Power”			setting

“Stored”

Via the “RF Power” menu item, you can adjust the transmission power in two steps.

It is vital to observe the notes on the supplied frequency information sheet.

Activating/deactivating the pilot tone transmission – “Pilot Tone”

	Advanced Menu		Pilot Tone			Pilot Tone
	Pilot Tone			Active			Inactive
	Active
Call up		Select the desired			Store the setting
“Pilot Tone”		setting

“Stored”

The radio microphone adds an inaudible signal, known as the pilot tone, to the transmitted signal. The receiver detects and evaluates the pilot tone.

The pilot tone supports the receiver’s squelch function (Squelch) and protects against interference due to RF signals from other devices.

25