Synchronizing the radio microphone with a receiver
Synchronizing the radio microphone with a receiver
When synchronizing the radio microphone with a receiver, please observe the following:
Only use a transmitter and a receiver from the same frequency range (see the type plate on the transmitter and the receiver).
Make sure that the desired frequencies are listed in the enclosed frequency information sheet.
Make sure that the desired frequencies are approved and legal in your country and, if neces- sary, apply for an operating license.
Synchronizing the radio microphone with the receiver – individual operation
Upon delivery, the radio microphone and the receiver are synchronized with each other.
If, however, you cannot establish a transmission link between radio microphone and receiver, you have to synchronize the channels of the devices.
For information on automatic synchronization of the radio microphone with the receiver (individual operation), refer to the instruction manual of the receiver. This information
is marked with the
icon.Alternatively, you can set the channel on the radio microphone manually:Make sure that you set the radio microphone to the same frequency bank and the same channel as the receiver (see page 21).
If you still cannot establish a transmission link, refer to the chapter “If a problem occurs ...” on page 29.
Synchronizing radio microphones with receivers – multi-channel operation
Combined with ew 500 G3 receivers, ew 500 G3 radio microphones can form transmission links that can be used in
For information on automatic synchronization of radio microphones with receivers
For more information on
26