Sennheiser System 2013 PLL manual Technical data, Receiver EK 2013 PLL

			Technical data
Receiver EK 2013 PLL
Frequency range	EK 2013-6-D	8 m frequency band	36.64-37.98 MHz
	EK 2013-6-1	8 m frequency band	30-36 MHz
	EK 2013-6-2	8 m frequency band	35-40 MHz
	EK 2013-6-3	8 m frequency band	39-45 MHz
	EK 2013-8	4 m frequency band	72.025-75.975 MHz
	EK 2013-9	2 m frequency band	173.350-175.02 MHz
Frequency preparation		Phase Lock Loop (PLL) Technique, 16 channels
Modulation type		FM
Rated lift/peak lift ± 8 kHz / ± 12 kHz
Channel grid/switching band width		EK 2013-6-D	40 kHz / 2.34 MHz
		EK 2013-6-1	40 kHz / 2 MHz
		EK 2013-6-2	40 kHz / 2 MHz
		EK 2013-6-3	40 kHz / 2 MHz
		EK 2013-8	25 kHz / 4 MHz
		EK 2013-9	25 kHz / 2 MHz
Sensitivity		typ. 0.5 ∝ V for 26 dB S/N
(measured via artificial antenna)
Neighboring channel selection		typ. 70 dB
LF transmission range		40 - 16,000 Hz
Nonlinear distortion factor
at 1 kHz and rated lift		typ. 1 %
LF output 1:	3.5 mm dia. jack	High:	2 x 0.7 V / 32 U
LF output 2:	2.5 mm dia. jack	Low (hearing aids):	2 x 3 mV / 2 kΩ
Impedance at LF output 2
for connection of hearing aids
in normal operation		3 kΩ
with activated automatic fade-in		80 U to 1 kU adjustable
Operating voltage 2.4 V
Current consumption		approx. 45 mA
Operating time		> 14 hours with RECHARGEABLE battery
pack		BA 2013
		> 40 hours with 2 x Alkaline AA cells in B 2013
Battery check		red LED for operating voltage < 2.2 V
Dimensions		18 x 58 x 95 mm
Weight (incl. B 2013)		approx. 130 g
German ZZF Certification No.		A 014 926 B ME (only -6)
Scope of delivery		1 Receiver EK 2013 PLL
		1 Battery compartment B 2013

Not responsible for errors. Subject to change without notice.

2.16