Server Technology BL20P manual Operating Dimensions, Performance, Specifications for RJ, Connector

QuickSpecs

HP ProLiant BL20p p-Class Server Blade

Technical Specifications

Operating and	Dimensions	Height	10.405 in (26.43 cm)
Performance		Width	1.535 in (3.899 cm)
Specifications for RJ-		Depth	27.697 in (70.35 cm)
45 Patch Panel
	Capability	IEEE 802.2, 802.3, 802.3u
	Network Transfer Rate	10 Base-T (half-duplex)	10 Mbps
		10 Base-T (full-duplex)	20 Mbps
		100 Base-TX (half-	100 Mbps
		duplex)
		100 Base-TX (full-	200 Mbps
		duplex)
		1000 Base-TX (full-	1000 Mbps
		duplex)
	Connector	RJ-45
	Cable Support	10 Base-TX	Categories 3, 4, or 5 UTP (2 or 4 pair); up to
			328 ft (100 m)
		100 Base-TX	Category 5 UTP (2 pair); up to 328 ft (100 m)
		1000 Base-TX	Category 5E (4 pair); up to 328 ft (100 m)
	Power Requirements	200 mA at + 5V DC; 500 mA at -48V
	Temperature Range	Operating	50° to 95° F (10° to 35° C)
		Non-operating	-22° to 140° F (-30° to 60° C)
	Relative Humidity	Operating	20% to 80%
	(non-condensing)	Non-operating	5% to 95%
	Wet Bulb Temperature Operating		82.4° F (28° C)
		Non-operating	101.7° F (38.7° C)

NOTE: Operating temperature has an altitude derating of 34° F per 1,000 ft (1° C per 304.8 m). No direct sunlight. Upper operating limit is 10,000 ft or 70Kpa (3,048 m or 10.1 psia). Upper non- operating limit is 30,000 ft or 30.3 KPa (9,144 m or 4.4 psia). Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.

Operating and	Dimensions	Height	10.405 in (26.43 cm)
Performance		Width	1.535 in (3.899 cm)
Specifications for GbE2		Depth	27.697 in (70.35 cm)
Interconnect Switch
	Weight	12.0 lb/5.4 kg per interconnect switch
	Performance	24 Gbps External port bandwidth per server blade enclosure (full
		duplex)
		Forwarding rate 1.5 million pps per gigabit port (64-byte packets)
		Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex
		support
	Forwarding Mode	Store and forward
	MAC Addresses	2,048 per interconnect switch
	Forwarding table age Maximum age: 1 to 65535 seconds; default: 300 seconds
	time
	Memory	128MB Main, 32MB flash and 2MB packet buffer per interconnect
		switch
	Compliance	IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3z (F-GbE2 only), 802.1D,
		802.3ac, 802.3ad (Static), and 802.1Q

DA - 11411 Worldwide QuickSpecs — Version 24 — 9.24.2004 Page 28