ASSEMBLY

ASSEMBLY

OIL REQUIREMENTS

Tank

Rear mounted hydraulic pumps are attached directly to the tractor PTO and will be operating when the tractor engine is running. Never start a tractor with a rear mounted pump attached without first filling the hydraulic tank with the correct hydraulic oil. Rhino specifies hydraulic oil based on ambient operating temperature ranges as prescribed in iso standards. The most common oil used in Rhino mowers is the AW ISO VG 100 Oil. The vg100 oil has the most optimal operating temperature range in regard to ambient temperatures but will also survive as mower component temperatures rise. It is no uncommon to see oil temperatures exceeding 200º in the summer time. In addition, a good quality vg100 oil will provide sufficient lubrication in cold temperatures to allow low idle warm up of the machine to enable operation within the temperature range specified. Hydraulic oil must be filtered prior to installing it the hydraulic tank of the mower. Fill reservoir to approximately 2” below the top of the tank. The capacity is approximately 200 liters (44 gallons). Do not overfill the tank.

FITTING CONTROL UNIT IN CAB

CABLE CONTROLLED MODELS

The control unit is bolted to a mounting bracket.

This bracket may be bolted to the mud wing or cab cladding in a convenient location ensuring that no structural member of the cab or roll bar is drilled.

In deciding the final position of the control box remember not to exceed the minimum acceptable bend -radii of 8"' for the cables.

The control lever for the cable operated rotor control valve is mounted in a similar fashion adopting the same precautions pertaining to drilling and cable runs.

RUNNING UP PROCEDURE

1.Ensure P.T.O. lever is in neutral position, and isolate tractor hydraulic linkage. Start tractor and select external service supply. Allow the tractor to run for several minutes before attempting to operate any of the machine control levers.

2.On operating move the levers through their complete range ensuring that all movements are functioning correctly.

3.Check the tractor rear axle oil level and top up if necessary.

4.Place the flail head at a safe attitude and bring tractor engine revolutions to 1000 rpm. Engage P.T.O. and allow the rotor to run for several minutes. Do not leave the tractor cab or allow anyone to approach the flail head at this time.

Do not allow the pump to continue working if the rotor does not turn. Overheating and serious pump damage to the pump can be caused in a very short time.

5.After running up the machine, increase PTO speed to approximately 360 RPM. Run machine further for five minutes before disengaging the PTO and stopping tractor. The reason for this running period under a no load condition is to thoroughly circulate the oil in the reservoir through the return line filter.

6.Check the hose runs and observe that they are free from any pinching, chafing, straining or kinks. Recheck the oil level in the tank and top up as necessary.

1900 07/10

Assembly Section 3-12

© 2010 Alamo Group Inc.

Page 96
Image 96
Servis-Rhino 1900 manual OIL Requirements, Fitting Control Unit in CAB, Running UP Procedure

1900 specifications

The Servis-Rhino 1900 is a versatile and robust piece of machinery designed for heavy-duty agricultural tasks. This model is particularly revered for its superior performance and durability, making it an essential tool for farmers looking to maximize efficiency on their land.

One of the standout features of the Servis-Rhino 1900 is its powerful engine. Equipped with a high-capacity engine, it delivers reliable horsepower that ensures optimal performance even in challenging conditions. This allows operators to complete tasks quickly and efficiently, whether it's mowing, mulching, or other heavy-duty applications.

The build quality of the Servis-Rhino 1900 is another key characteristic. Constructed with high-strength steel, the frame and components are designed to withstand the rigors of agricultural work. This robust construction not only enhances the machine's longevity but also provides stability, which is crucial when operating on uneven terrain.

In terms of technology, the Servis-Rhino 1900 incorporates advanced engineering solutions that enhance its functionality. The machine features a user-friendly control panel that allows operators to easily adjust settings and monitor performance in real-time. This level of control is crucial for ensuring that tasks are completed with precision and efficiency.

Another technological innovation is its cutting system. The Servis-Rhino 1900 is equipped with sharp, durable blades that can tackle thick grass and vegetation with ease. The blades are designed for easy maintenance, and periodic sharpening can be performed without significant downtime, thereby ensuring that the machine remains effective throughout its operational life.

The versatility of the Servis-Rhino 1900 makes it suitable for a range of applications, from agricultural fields to residential landscaping. Its ability to handle different attachments allows it to perform numerous tasks including brush clearing, roadside mowing, and garden maintenance.

Additionally, the machine's compact design means it can easily navigate tight spaces, making it ideal for areas that larger machinery cannot access. This adaptability ensures that users can maximize their productivity across diverse job sites.

Overall, the Servis-Rhino 1900 combines power, durability, and versatility in a single package, making it a preferred choice among agricultural professionals seeking a reliable solution for their mowing and cutting needs. Whether for commercial farming or personal property maintenance, the 1900 stands out as a dependable asset that enhances operational efficiency.