ASSEMBLY

Mounting Loader

Position loader uprights so midmounting tubes are tight against hinges until loader has finished rotating so loader yoke cross-tube does not hit lower flange of front mounting channel. Maintain gap between cut-outs in loader uprights and midmounting tubes until loader yoke cross-tube contacts upper flange of front mounting channel (Figure Asm-L- 0032).

Be sure to use flex-lock nut to clamp hinge. Tighten flex-lock nut against hinge securely, but to no more than 125 ft./lbs. of torque.

Mounting is basically reverse of dismounting.

1.Slowly drive tractor up to loader until hoses will reach from loader to tractor. Engage tractor brakes and shut off tractor engine.

2.Connect quick couplers between tractor and loader, matching color coded bands.

Note: Make sure quick couplers are clean, and make sure hinges are fully open.

3.Start tractor engine and release tractor brakes. Slowly drive tractor ahead while activating lift control lever to extend or retract lift cylinders, positioning tractor so hinges hook midmounting bracket tubes as loader side frame uprights rotate.

Note: Maintain clearance between side frames and tractor hood and front axle when mounting loader.

4.Put tractor in neutral. Retract lift cylinders bringing side frame channels up so front yoke tube contacts front mounting top flange. Move tractor ahead so front yoke tube engages in front mounting bracket channel and loader side frame uprights seat properly on midmounting bracket tubes (with no gap between upright cut- out and front of tube). Engage tractor brakes and shut off tractor engine.

5.Clamp hinge around midmounting tube using 3/ 4 washer and flex-lock nut.

6.Loop hoses through hose support bracket on front mounting bracket.

7.Loop one rubber tie strap around hoses and hook on yoke to keep tension on hoses. Secure hoses to loader right side frame using other rubber tie strap (Figure Asm-L-0033).

2410 02/10

Assembly Section 3-7

© 2010 Alamo Group Inc.

ASSEMBLY

Page 41
Image 41
Servis-Rhino 2410 manual Mounting Loader

2410 specifications

The Servis-Rhino 2410 is a highly regarded piece of equipment in the agricultural sector, particularly known for its efficiency and reliability in land preparation, maintenance, and crop management. This versatile machine stands out for its robust construction and user-friendly design, making it a favorite among farmers and landscapers alike.

One of the main features of the Servis-Rhino 2410 is its exceptional cutting width of 240 inches, which allows operators to cover large areas in a relatively short time. This efficiency not only saves time but also minimizes the cost of fuel and labor, making it an economical choice for large-scale operations.

The 2410 is equipped with advanced rotary cutter technology, enabling it to handle a variety of vegetation types, from thick grasses to dense brush. The rotary blades are designed for optimal performance, ensuring a clean cut and preventing the risk of clogging or jamming, which can lead to downtime. This is particularly important during peak seasons when time is of the essence.

In terms of power, the Servis-Rhino 2410 typically requires a tractor with a minimum horsepower of around 70 to function effectively. This power requirement ensures that the machine can operate under various tough conditions, including hilly terrain and dense vegetation. The robust construction of the 2410 also contributes to its longevity, allowing it to withstand the rigors of agricultural use.

Another significant characteristic of the Servis-Rhino 2410 is its adjustable hitch system, providing flexibility in terms of attachment to different tractor models. This versatility allows the 2410 to be utilized across various farms and applications, enhancing its appeal among users with diverse needs.

Additionally, the 2410 is designed with safety in mind, featuring shielded blades and an overload protection system that minimizes the risk of mechanical failure. The user-friendly controls make it easy for operators to manage the machine, allowing for precise adjustments while maintaining productivity.

Overall, the Servis-Rhino 2410 combines innovative technology with durable construction, making it an exceptional tool for farmers and land managers looking to enhance their productivity while ensuring a high standard of performance. Its combination of efficiency, versatility, and user-friendly design solidifies its position as a leading choice in the agricultural equipment market.